Bigbikemad Goodies and Bling Page
The following are either items you cannot buy in the shops, made on a small scale by fellow enthusiasts, or regular kit that we feel is especially good. The range is small at present but growing. We welcome anyone interested in our affiliate marketing programme. Naturally, all BigBikeMad items come with full money back guarantee.
AdMore Lighting – Brake light kits and light bars – a great safety aid.
Bigbikemad is now UK distributor for Admore lighting. AdMore is a Canadian company that has come up with some really neat motorcycle lighting stuff. Their top box kits go much further (and are much brighter than) the standard GIVI brake lights – with their E55 Maxia set up you also get a permanent tail light AND amber indicators thanks to the dual colour LED arrays. You can even get kits for side cases. All kits are tailor made and fitting is really easy, with pre-built loom and excellent instructions. All kits are Canbus compatible meaning you’ll get no problems when fitting to BMW’s. Get yourself noticed by other road users. Order a kit today.
GIVI E55 Maxia Kit
The LED55-T-TS light kit has been custom designed to fit the GIVI E55 top case. Each kit contains two high intensity LED arrays that fit perfectly in the stock GIVI light cut-outs of the E55 case (no modifications required!). Each LED array is equipped with 3mm high-powered bi-color (Red/Amber) LEDs. The mini controller embedded in the main harness allows you to connect the light kit to your bike’s tail and brake lights and turn signals! The case lights are always on when riding, the lights brighten to high intensity when the brakes are applied, and the right or left side of the case lights flash amber with your turn signals!
This kit has an added safety feature: it is programmed to quickly modulate (flash) your kit brake lights three to four times when you apply your brakes to alert the driver behind that you are braking.
With this kit you receive: two (2) high intensity bi-color LED arrays, one (1) mini controller (with turn signal functionality) embedded in main wire harness, wiring and weatherproof quick-disconnect connectors, and detailed instructions with guiding pictures. Installation is easy and can be done in an hour or two using basic tools! You will not ride unnoticed with this light kit installed in your E55 top case!
Buy here (send us a message) or see us on E Bay. £135 including DHL international delivery . We do not delivery to some countries. Please check before ordering. Please note: Customs charges, if any, are the responsibility of the buyer. Click on pic to go to install video.
GIVI E52 Kit
The LED52-T-TS light kit has been custom designed to fit the GIVI E52 top case. Each kit contains two high intensity LED light panels that fit perfectly in the stock GIVI light cut-outs of the E52 case (no modifications required!). Each LED panel is also connected to an 8″ high intensity LED strip that fits behind the red lenses of the E52 case to give you and your bike great wrap-around visibility! The mini controller allows you to connect the light kit to your bike’s tail and brake lights and turn signals! The case lights are always on when riding, the lights brighten when the brakes are applied, and the right or left side of the case lights flash with your turn signals! Please note Turn signals are RED so if your country uses amber these can be deactivated leaving just brake and running lights.
With this kit you receive: Two (2) high powered LED light strips, two (2) high powered LED light panels, one (1) mini controller with turn signal functionality embedded in the main wire harness, wiring and weatherproof quick-disconnect connectors and detailed instructions with guiding pictures. Installation is easy and can be done in about an hour using basic tools! You will not ride unnoticed with this light kit installed in your E52 top case!
Buy here (send us a message) or see us on E Bay. £135 including DHL International delivery.Please note: Customs charges, if any, are the responsibility of the buyer. Click on Pic to go to install video.
Light-bar (Small)
LED High-Powered Light Bar with modulating brake light & progressive, amber turn signals.
Our high-powered / low current AdMore Mini Light Bar is perfect for motorcycle & scooter use. It enhances rider safety and looks good at the same time. It incorporates the latest in LED technology with 54 high-intensity, bi-color (red/amber) LEDs to provide tail light, brake light and progressive amber turn signals. The Mini Light Bar even incorporates a brake light modulation feature (3-4 flashes) to quickly flash the brake lights at full intensity and alert drivers behind that you are slowing down or stopping. The Mini Light Bar also includes “progressive” amber turn signals that flow in the turn direction for added visibility!
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! The light bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Approximate size: 8″ x 1 1/4″ x 1″
What makes the AdMore Light Bar unique?
- Single housing incorporating 54 unified, high intensity, bi-color (red/amber) LEDs
- Brake light modulator included
- Eye-catching progressive amber turn signals
- Works with hazard (4-way flasher) lights
- Universal, black, powder-coated bracket included
- Easy installation; all required hardware & premium connectors included
- Optional smoke lens available
- Canbus compatible (all our products are!)
- Full one (1) year warranty
Buy Here (send us a message) or see us on E Bay. £135 including International delivery.Please note: Customs charges, if any, are the responsibility of the buyer.
GIVI V46 – Brake and tail lights only
This kit is custom designed for the V46 GIVI case and provides tail light and brake light functions (no turn signals).
The LEDV46-T is specifically designed for the GIVI V46 top case. This LED kit provides for light output that is much brighter than regular incandescent bulbs. We estimate the light output of our kit to be over 50% brighter than a conventional light kit. Unlike an incandescent kit, which illuminates only during braking, the LEDV46-T kit is always on with your bike’s tail lights and brightens significantly with your brake lights.
Using high intensity, high efficiency LED bulbs, our brake light kit draws only 180ma with the brakes applied (as compared with 635ma using conventional incandescent bulbs).
Do you have the V46 Tech case with clear lenses? No problem! Our V46 kits come with red LEDs. They will look and work great on your Tech case!
With this kit you receive: one (1) high powered LED printed circuit board, one (1) mini controller (v.1) embedded in main wire harness, wiring and weatherproof quick-disconnect connectors and detailed instructions with guiding pictures.
You will not ride unnoticed with this light kit installed in your V46 case!
If you have an FJR 1300 please advise as there is a special harness for this bike. All other bikes take standard harness.
Buy Here (send a message) or see us on E Bay. £115 including International delivery.Please note: Customs charges, if any, are the responsibility of the buyer. Click on Pic to go to install video.
GIVI V46 – Brake, Taillight and Indicators
This kit is custom designed for the V46 GIVI case and provides tail light, brake light and turn signal functions. Indicators on this unit are RED. This may or may not comply with your local regulations.
The LEDV46-T-TS is specifically designed for the GIVI V46 top case. This LED kit provides for light output that is much brighter than regular incandescent bulbs. We estimate the light output of our kit to be over 50% brighter than a conventional light kit. Unlike an incandescent kit, which illuminates only during braking, the V46 kit is always on with your bike’s tail lights and brightens significantly with your brake lights.
Using high intensity, high efficiency LED bulbs, our brake light kit draws only 180ma with the brakes applied (as compared with 635ma using conventional incandescent bulbs).
With this kit you receive: One (1) center-mounted LED printed circuit board, two (2) 9-piece LED arrays, one (1) mini controller (with turn signal functionality), embedded in main wire harness, wiring and weatherproof quick-disconnect connectors, and detailed instructions with guiding pictures.
Do you have the V46 Tech case with clear lenses? No problem! Our V46 kits come with red LEDs. They will look and work great on your Tech case!
You will not ride unnoticed with this light kit installed in your V46 case!
If you have an FJR 1300 please advise as there is a special harness for this bike. All other bikes take standard harness.
Buy Here (send a message) or see us on E Bay. PRICE £135 including International delivery.Please note: Customs charges, if any, are the responsibility of the buyer. Click on Pic to go to install video.
Side Case Wiring Harness – SCPH2
Extra / Replacement side-case power harness.
Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your GIVI cases with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer cases between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connectors to connect to the existing AdMore connectors on your GIVI cases. Also included is a set of wire taps to connect the new power harness to your bike.
Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.
Power Harness for LED360-S-TS, LED41-S-TS, LEDV35-S-TS, LED3618-S-TS, or LED4014-S-TS
Buy here or see us on E Bay. £85 Including International delivery.Please note: Customs charges, if any, are the responsibility of the buyer. Click on Pic to go to install video.
Carbon Fibre Products
Honda Super Blackbird CBR1100XX
Carbon Fibre Honda Blackbird Dash Cover – Analogue Instruments Dash (1997-2000)
Genuine gloss finish carbon fiber dash cover handmade in England.
Self adhesive backing.
Fits Pre 2001 model Blackbirds with analogue dash only.
£POA
Carbon Fibre: Honda Blackbird All Model years 1997-2004: Yoke Cover
Genuine carbon fiber yoke cover handmade in England.
Features unique ‘Fish Scale’ carbon weave and gloss finish.
Self adhesive backing.
Fits all model years of Blackbird. Price includes yoke cover only as shown bottom centre in image , not dash or reservoir covers.
£POA
BMW K1200GT / K1300GT Carbon Fibre Parts
Carbon Fibre: BMW K1200 / 1300GT Dash Cover
Genuine carbon fiber dash cover handmade in England.
Features unique ‘Fish Scale’ carbon weave and gloss finish.
Self adhesive backing.
Fits all BMW K1200GT / K1300GT models from 2006-2011.
£POA
Carbon Fibre: BMW K1200 / 1300GT Steering Head Set
Genuine carbon fiber two piece set handmade in England.
Features unique ‘Fish Scale’ carbon weave and gloss finish.
Covers steering head top and existing dull plastic nut cover
Self adhesive backing.
Fits all BMW K1200GT / K1300GT models from 2006-2011.
£POA
Kawasaki ER6-N
Various parts for this popular and stylish middleweight.
ER6-N Carbon Cockpit Set
Two piece set as shown of self adhesive carbon for the popular Kawasaki ER6-N.
Genuine gloss finish carbon fiber dash cover handmade in England.
Self adhesive backing.
£POA
Honda CB 600 Hornet
Hand made carbon fibre parts for this classic quality middleweight.
£POA
Honda CB600 Hornet Dash Accent
Genuine gloss finish carbon fiber dash accent handmade in England.
Self adhesive backing.
£POA
Honda CB600 Hornet Yoke Cover
Genuine gloss finish carbon fiber yoke cover handmade in England.
Self adhesive backing.
£POA
Yamaha Fazer 600
Chrome and Other Parts
Honda Valkyrie F6C Parts
Honda Valkyrie F6C Chrome Dragon Stacks
Honda Valkyrie Dragon Stacks
Honda Valkyrie F6C Dragon Stacks.
Until now the only enhancement for the tops of the carbs has been velocity stacks machined from solid billet. Trouble is, these cost anything up to $350. Now there is a cheaper alternative. These just stick straight onto the carb tops using a specially formulated moisture and high temperature double sided tape (included in the kit). Dragon stacks are a cosmetic part only and do not affect the performance of the bike.
Price (£99) includes delivery.
Buy here (send a message) or see us on E Bay.
Terms of Business:
All items come with money back guarantee against defective workmanship. In order to claim under the guarantee items must be in original packaging and not have been fitted (e.g. glue backing 100% intact). Items must be capable of re-sale and returned within 28 days of purchase. return postage costs are the responsibility of the purchaser. Signed for mail service must be used.